The Husqvarna 555FX is a very powerful forestry clearing saw developed for full time spacing tasks in tough conditions. The X-Torq engine provides raw power, rapid acceleration and excellent fuel economy. Short tube and bevel gear angled 24 degrees simplifies directional felling in dense forests. Very low vibrations thanks to LowVib. Delivered with Balance XT harness.
Adjustable and ergonomically designed handlebar for best comfort.
Magnet locking pin holder facilitates easy blade switch.
The engine and starter have been designed so the machine starts quickly with minimum effort. Resistance in the starter cord is reduced by up to 40%.
Thumb-operated throttle for efficiency and precision control. Relieves pressure on the hand muscles.
Cylinder displacement – 53.3 sm³
Power output – 2.8 kW
Fuel tank volume – 1.1 l
Fuel consumption – 1.34 kg/h
Fuel consumption – 480 g/kWh
Idling speed – 2800 rpm
Ignition module air gap – 0.3 mm
Electrode gap – 0.5 mm
Torque, max. – 3.5 Nm
Torque, max. at rpm – 6900 rpm
Clutch engagement speed (±120) – 5700 rpm
Maximum rpm output shaft – 10500 rpm
Gear ratio – 1.29
Drive gear angle – 24 °
Weight (excl. cutting equipment) – 8.9 kg
Lubricant type (bevel gear) – Biodegradable grease
Weight (excl. cutting equipment) – 8.9 kg
Sound power level, guaranteed (LWA) – 117 dB(A)
Sound pressure level at operators ear – 103 dB(A)
Equivalent vibration level (ahv, eq) left handle – 2.1 m/s²
Equivalent vibration level (ahv, eq) right handle – 2.3 m/s²